Used Conveyors and Conveyor Systems

Buy a Used Conveyor Without the New Lead Time

A new conveyor means a long lead time and a real capital outlay for a machine that is mechanically simple and ages well. A used belt or roller conveyor from a plant that reconfigured can run for years, which is why most operators check the used market first before they order new.

Here is the part a listing photo will not tell you: a used conveyor's value is in the belt, the drive, and the frame. "Runs fine" is not the same as a belt with tracking life left, a gearbox without bearing noise, or a frame that has not been hit by a forklift. This page gives you the type breakdown and the inspection points to judge a listing from your desk, then sends you straight to the live conveyor listings.

Conveyor Types and What to Check

Belt Conveyors

The general-purpose workhorse: a continuous belt over a powered pulley for moving boxes, parts, or bulk product. Buying used, check belt width and length, belt material and condition (cracking, fraying, worn cover), the drive motor and gearbox, and the frame material. Note whether the bed is flat, troughed, or inclined, because that changes what the belt and drive have already been through.

Roller Conveyors (Gravity)

Unpowered rollers on a frame, moved by slope or by hand, used for accumulation, packing lines, and load/unload zones. Check roller pitch and diameter, frame width, and the rated load. Spin every roller by hand: seized or flat-spotted rollers are the common used fault. Note whether the run is straight or includes curve sections, which are harder to source as spares.

Roller Conveyors (Powered / Live-Roller)

Driven rollers (belt, chain, or motorized-roller zones) for controlled transport without an operator pushing product. Check whether the drive is zoned or continuous, the motor type, and the controls or VFD condition. Confirm whether the line has accumulation capability, because zone control and sensors are where used powered conveyors most often need work.

Accumulation Conveyors

A powered roller line built to let product queue without back-pressure, feeding a downstream machine at its own pace. Check whether it is zero-pressure or minimum-pressure, the zone count, and the control logic. The sensors and zone controllers carry most of the value and most of the risk on a used unit.

Incline / Decline Conveyors

A belt conveyor run at an angle to change elevation between floors or machines. Check the angle, whether the belt is cleated or smooth, and the transition design at the top and bottom. A cleated belt that has lost cleats or a worn transition is a real cost to put right.

Spiral and Specialty Conveyors

Vertical spiral lifts, vertical reciprocating units, and purpose-built specialty conveyors for tight footprints or high vertical rise. Check the footprint against your space, the rated throughput, and the vertical rise. Specialty units are the hardest to inspect remotely, so weight your due diligence toward the drive and the controls.

How to Buy a Used Conveyor

Run this checklist before you commit, whether you walk the floor yourself or send someone:

• Belt condition and tracking. Look for fraying, splice integrity, and tracking drift. A belt that wanders off-center under load is telling you the frame, pulleys, or tracking adjustment are worn.
• Drive motor and gearbox. Listen for bearing noise, check for oil leaks at the gearbox, and read the motor nameplate against the duty the line actually ran.
• Frame and rollers. Check for rust, bent rails, and seized rollers. Bent rails are usually forklift damage and they affect tracking.
• Controls and VFD. Inspect panel condition and confirm sensors and zone controls function. On powered and accumulation lines this is where the money is.
• Prior duty cycle. Ask about food-grade washdown history, abrasive-product wear, and hours if known. A washdown conveyor and a dry-box conveyor age very differently.

None of this needs manufacturer software. It is the same walk-around an operator does on the floor, done from the listing specs and a few questions to the seller.

Used Conveyor FAQ

Am I buying the belt or the whole conveyor?

On Requip Market, a conveyor listing is the whole machine: frame, belt or rollers, drive, and controls as described. If you only need a replacement belt as a wear part, that is a separate purchase from a belting supplier, not a used-equipment listing. The listing specs tell you which you are looking at.

What does a used conveyor cost compared to new?

It depends on type, length, drive, and condition, but a well-maintained used conveyor commonly lands at a fraction of new for a machine that is mechanically simple. The bigger savings is the lead time: a used line can ship now instead of waiting on a build slot. Browse current listings for real asking prices.

How is a used conveyor inspected before I buy?

Work the checklist above: belt and tracking, drive motor and gearbox, frame and rollers, controls and VFD, and the prior duty cycle. Most of it you can judge from listing specs and photos plus a few seller questions; the rest is a short floor walk-around.

Belt vs roller conveyor, which do I need?

Belt conveyors move small parts, bulk, and irregular product across a continuous surface. Roller conveyors move flat-bottomed totes and boxes and allow accumulation. If product is flat and rigid, look at rollers; if it is small, loose, or irregular, look at belt.

How is a conveyor crated and shipped?

Conveyors usually ship on a flatbed or as freight, sometimes broken into sections. Every listing has built-in freight coordination so you can request a crating and shipping quote from the listing page before you buy.

How do I list my own conveyor for sale on Requip Market?

Create a free account and add a listing with your conveyor's specs, condition grade, and photos. Listing is free, sellers are verified, and freight coordination is built in. List your conveyor to reach operators who are buying.

Related Equipment and Resources

Browse the full Conveyors & Material Handling category, or look at adjacent lines: used packaging equipment (including packaging conveyors) and used bindery equipment. Looking for documentation? The Manuals Library has operator and service PDFs, and How It Works walks through buying and selling on the platform.